Secondary Coil Winding

1. Disconnect the high-tension leads.

2. Measure the resistance using an ohmmeter.




1. From lead hole 1 to 4, and lead hole 2 to 3. (FS)
- If not as specified, replace the ignition coil.




2. From lead hole 1 to 4, and lead hole 2 to 5, and lead hole 3 to 6. (KL)
- If not as specified, replace the ignition coil.

Specification: 11.5 - 15.5 kohms [20 °C {68 °F} ]