Repairs and Inspections Required After a Collision: Service and Repair

Side Air Bag Module
When the side air bag module deploys due to a collision, the interior or the seat back (pad, frame, etc.) may become damaged. if the seat back is reused and the side air bag module does not deploy properly, a serious accident may result. When the side air bag module deploys, always replace both the side air bag module and seat back (pad, frame, trim) with new parts. After preparation and also when the side air bag module is deployed in the vehicle using SSTs (Deployment tool and Adapter harness), confirm that the seat operates normally and that the harness Is positioned properly.

SAS Control Module
Once an air bag is deployed due to an accident or other causes, the SAS control module must be replaced with a new one even if the used one does not have any external signs of damage. The used SAS control module may have been damaged internally which may cause Improper operation, resulting in major Injuries or even death. The used SAS control module cannot be bench-checked or self-checked.

Side Air Bag Sensor
Because a sensor is built into the side air bag sensor, when the side air bag module operates (deploys), there may be a problem, such as an internal malfunction, even if there is not any external damage or deformation. If the side air bag sensor is reused, the side air bag module may fail to operate normally and cause a serious injury. Always replace the side air bag sensor with a new one. The side air bag sensor cannot be bench-checked or self-checked.