Suspension: Service Precautions

WHEELS AND TIRES REMOVAL/INSTALLATION
^ The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, retighten it to 89 - 117 Nm (9 - 12 kgf-m, 66 - 86 ft. lbs.).

SUSPENSION LINKS REMOVAL/INSTALLATION
^ Tighten any part of the suspension that uses rubber bushings only after the vehicle has been lowered and unloaded.

Note: Unloaded ... Fuel tank full, engine coolant and engine oil at specified levels; spare tire, jack and tools in designated position.

POWER STEERING COMPONENTS REMOVAL/INSTALLATION
^ If any power steering fluid line has been disconnected anytime during the procedure, add ATF M-III or equivalent (e.g. Dexron), bleed the fluid line, and inspect for leakage after the completed.