On-Board System Readiness Tests Access Procedure

NOTE: This is a generic function.

1. Perform the NGS Tester Hook-up Procedure.




2. Move the cursor to GENERIC OBD II FUNCTIONS.
3. Press the TRIGGER key to enter this selection.




4. Press TEST.




5. Monitor the OBD-II systems operating status.
6. If each system's status initialization is necessary, use the following procedures:
1. Press the cancel key until you return to the main menu.
2. Move the cursor to GENERIC OBD II FUNCTIONS
3. Press the TRIGGER key to enter this selection.
4. Press CONT.
5. Move the cursor to CLEAR DIAGNOSTIC CODES.




6. Press the TRIGGER key to enter this selection.




7. Press START.