Manual Transaxle

VEHICLE SPEEDOMETER SENSOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the air cleaner component, battery and battery box.
3. Disconnect the vehicle speedometer sensor connector.
4. Remove the vehicle speedometer sensor.
5. Apply transaxle oil to a new O-ring and install it on a new vehicle speedometer sensor.
6. Install the vehicle speedometer sensor.
Tightening torque
7.9 - 11.2 Nm (80 - 115 kgf.cm, 69.5 - 99.8 inch lbs.)
7. Connect the vehicle speedometer sensor connector.
8. Install the battery, battery box and air cleaner component.
9. Connect the negative battery cable.