Dashboard Removal and Installation

1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module.
3. Remove the passenger-side air bag module.
4. Remove the steering wheel. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
5. Remove the column cover.
6. Remove the sidewall.
7. Remove the front side trim.
8. Remove the under cover.
9. Remove the lower panel.
10. Remove the installation nuts then shift the assembled steering shaft in the dashboard. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
11. Remove the PCM.
12. Remove the A-pillar trim.




13. Remove in the order indicated in the table.
14. Install in the reverse order of removal.