Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2000 >> 626 LX L4-2.0L DOHC >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> Non-Trouble Code Diagnostic Procedures - ABS With Traction Control >> Diagnostic Procedures >> For ABS >> 3: ABS Warning Light GO On and Off

3: ABS Warning Light GO On and Off

ABS WARNING LIGHT GO ON AND OFF





Description

Steps 1 - 5:





Diagnostic Procedure

^ When performing an asterisked (*) troubleshooting inspection, shake the wiring harness and connectors while doing the inspection to discover whether poor contact points are the cause of any intermittent malfunctions. If there is a problem, check to make sure connectors. Terminals and wiring harness are connected correctly and undamaged.

Caution Recheck the diagnostic trouble code after repair completion.

Note
^ The ABS warning light normally illuminates for 2 - 4 seconds after ignition switch is turned to ON.
^ If any symptoms have occurred in the past but are now okay, malfunction of related harness could be the possible cause and thus ABS CM is normal.
pro multis · About Operation CHARM