Steering: Service Precautions

WHEELS AND TIRES REMOVAL/INSTALLATION
^ The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, tighten it to 89 - 117 Nm (9.0 - 12.0 kgf-m, 66 - 86 ft.lbs.).

POWER STEERING COMPONENTS REMOVAL/INSTALLATION
^ If any power steering fluid line has been disconnected anytime during the procedure, add ATF or equivalent (e.g. Dexron), bleed the fluid lines, and inspect for leakage after the procedure has been completed.

CONNECTORS DISCONNECTION/CONNECTION
^ Disconnect the negative battery cable before doing any work that requires handling of connectors. Connect the negative battery cable only after the work is completed.