Low One-Way Clutch

LOW ONE-WAY CLUTCH DISASSEMBLY/ASSEMBLY





1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.

LOW ONE-WAY CLUTCH ASSEMBLY PROCEDURE

NOTE
- The outer tabs of the roller component must be facing up.





1. Install the roller component into the outer race.

CAUTION
- Inner race groove must be face up.





2. Install the inner race with the groove facing up, using clockwise rotating motion.





3. Check the operation of the low one-way clutch as follows:
- When the inner race is rotated in a clockwise direction, it should move freely.
- When the inner race is rotated in a counterclockwise direction, it should lock to the outer race.