Removal/Installation

1. Cover both sides of the rear window glass with thick cloth to protect the window.
2. Remove the scuff plate.
3. Remove the quarter trim.
4. Remove the rear package trim.




5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.

Convertible Top Removal Note
1. Unlock the top lock.
2. Lower the convertible top fully.

Convertible Top Installation Note




1. Insert the rain rail into the beltline molding lip, and install it over the studs.
2. Align and install the link bracket over the studs with no clearance between the studs and the bracket.




3. Tighten the installation bolts.

Tightening torque
19 - 25 N.m {1.9 - 2.6 kgf.m, 14 - 18 ft.lbf}