Cruise Control Module: Testing and Inspection

1. Remove the lower panel.
2. Remove the key interlock unit.
3. Remove the cruise control module with the connector connected.

Terminal Voltage Table (Reference): Connector View:

Terminal Voltage Table (Reference): Pinouts A - F:

Terminal Voltage Table (Reference): Pinouts G - P:

Terminal Voltage Table (Reference): Pinouts Q - T:

4. Measure the voltage at the cruise control module terminals as indicated.
5. Disconnect the cruise control module connector before inspecting for continuity at terminal T.
- If not as specified, inspect the parts listed under "Inspection area" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, replace the cruise control module.