Fluid - M/T: Service and Repair

TRANSMISSION OIL REPLACEMENT





1. Remove the drain plug B (with washer) and the check clue A.
2. Drain the oil into a container.
3. Wipe all plugs clean.
4. Install the drain plug B (with new washer).
Tightening torque
B: 40 - 58 Nm (4.0 - 6.0 kgf.m, 29 - 43 ft. lbs.)





5. Add the specified oil from check plug A port until the level reaches the brim of check plus hole.
Specified oil
Grade: API service GL-4 or GL-5
Viscosity: SAE 75W-90 (All season) or SAE
80W-90 (Above 10° C (50° F))
Capacity: 2.0 L (2.1 US qt.,1.8 Imp qt.)
6. Apply sealant to the threads of check plug A.





7. Install the check plug A.
Tightening torque
A: 25 - 39 Nm (2.5 - 4.0 kgf.m, 19 - 28 ft. lbs.)