Using SST (ECM Adapter Harness)

1. Turn the ignition switch to LOCK.
2. Access PCM.
3. Disconnect the PCM connector.




4. Connect the SST (ESM adapter harness) between the PCM and the vehicle harness connectors.






NOTE: In order to measure the voltage, insert the positive voltmeter probe into the female terminal of the SST (ESM adapter harness) connectors.

5. Inspect the PCM terminal voltage according to following table.

Part 1 Of 6:

Part 2 Of 6:

Part 3 Of 6:

Part 4 Of 6:

Part 5 Of 6:

Part 6 Of 6:

*: The voltages above will be measured when the battery voltage is 12 - 14 V

PCM Terminal voltage table (Reference)