Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2000 >> MX-5 Miata L4-1.8L DOHC >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Air Bag >> Service and Repair >> Air Bag Module Deployment and Disposal Procedures >> Air Bag Module Deployment >> Deployment Inside the Vehicle >> Passenger Air Bag Module

Passenger Air Bag Module

WARNING:
- A live (undeployed) air bag module may accidentally deploy when it Is disposed of and cause serious injury. Do not dispose of a live (undeployed) air bag module. If the SSTs (Deployment Tool and Adapter Harness) are not available, consult the nearest Mazda representative for assistance.

NOTE:
- When disposing of a deployed air bag module, refer to air bag module disposal procedure. (See AIR BAG MODULE DISPOSAL PROCEDURE.)

Passenger-side air bag module
1. Remove the glove compartment.
2. Disconnect the passenger-side air bag module connector.





3. Connect the SST (Adapter Harness) to the passenger-side air bag module as shown.





4. Connect the SST (Deployment Tool) to the SST (Adapter Harness).
5. Connect the red clip of the SST (Deployment Tool) to the positive battery terminal and the black clip to the negative battery terminal.
6. Verify that the red light on the SST (Deployment Tool) is illuminated.
7. Make sure all persons are standing at least 6 m (20 ft) away from the vehicle.
8. Press the activation switch on the SST (Deployment Tool) to deploy the passenger-side air bag module.
pro multis · About Operation CHARM