LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> MX-5 Miata LS L4-1.8L DOHC >> Repair and Diagnosis >> Cruise Control >> Testing and Inspection >> Reading and Clearing Diagnostic Trouble Codes >> How to Display and Read Diagnostic Trouble Codes >> Operation Mode >> NGS Tester Hook-Up Procedure

NGS Tester Hook-Up Procedure

NOTE: Verify that ignition switch is at LOCK position.

1. Insert the interface module and program card into the SST (NGS tester) control unit.
2. Plug the NGS OBD-II adapter into the interface module and the connector into the data link connector (DLC) located in the engine compartment via the Super MECS Adapter.




3. Plug the SST (NGS tester) power cable into the cigarette lighter or use Battery Hookup Adapter.
scientia non olet · About LEMON Manuals