| Clearance Between Thrust Lock Washer And C-Washer | 0.1 - 0.3 Millimeter (mm) |
| Thrust Lock Washer Thickness | 6.2 Millimeter (mm) |
| 6.4 Millimeter (mm) |
| 6.5 Millimeter (mm) |
| 6.6 Millimeter (mm) |
| Clearance Between Washer And Snap Ring | 0 - 0.1 Millimeter (mm) |
| C-Washer Thickness | 2.9 Millimeter (mm) |
| 3.0 Millimeter (mm) |
| 3.1 Millimeter (mm) |
| 3.2 Millimeter (mm) |
| Mainshaft Runout (Maximum) | 0.03 Millimeter (mm) |
| Clearance Between Mainshaft And Gear (or Bushing) Wear Limit | 0.15 Millimeter (mm) |
| Clearance Between Countershaft Center Bearing and Bearing Housing | 0 - 0.1 Millimeter (mm) |
| Countershaft Center Bearing Adjustment Shim Thickness | 0.1 Millimeter (mm) |
| 0.3 Millimeter (mm) |
| Clearance Between Mainshaft Front Bearing and Bearing Housing | 0 - 0.1 Millimeter (mm) |
| Mainshaft Front Bearing Adjustment Shim Thickness | 0.1 Millimeter (mm) |
| 0.3 Millimeter (mm) |