Disassembly and Assembly

OIL PUMP DISASSEMBLY/ASSEMBLY
1. Remove the oil pump.
2. Disassemble in the order indicated in the table.
3. Assemble in the reverse order of disassembly.

Inner Rotor Installation Note





1. Install the inner rotor and outer rotor into the oil pump body with the marks aligned as shown.

Oil Pump Cover Installation Note





1. Install the oil pump cover and tighten the bolts in the order shown.
Tightening torque 5.8 - 8.8 Nm (60 - 90 kgf-cm, 53 - 78 inch lbs.)