Disassembly/Assembly

CAUTION: If moisture or foreign material enters the refrigeration cycle, cooling ability will be lowered and abnormal noise will occur. Always Immediately plug all open fittings after removing any refrigeration cycle parts to keep moisture or foreign material out of the cycle.

1. Disassemble in the order indicated in the table.




2. Assemble in the reverse order of disassembly.

Expansion Valve Assembly Note
1. Replace the O-rings at the expansion valve joints.
2. Apply compressor oil to the O-rings and connect the joints.
3. Tighten the joint to the specified torque using two open-end wrenches.




4. Assemble the heat-sensing tube as shown in the figure

Evaporator Temperature Sensor Assembly Note




1. Assemble the evaporator temperature sensor as shown in the figure.