Using SST (ECM Adapter Harness)

1. Turn ignition switch off.
2. Access PCM.
3. Connect the SST (ESM adapter harness) between the PCM and the vehicle harness connectors.




4. Connect the SST (ESM adapter harness) between the PCM and the vehicle harness connectors.






NOTE: In order to measure the voltage, insert the positive voltmeter probe into the female terminal of the SST (ESM adapter harness) connectors.

5. Inspect the PCM terminal voltage according to following table.

Connector View:

Part 1 Of 11:

Part 2 Of 11:

Part 3 Of 11:

Part 4 Of 11:

Part 5 Of 11:

Part 6 Of 11:

Part 7 Of 11:

Part 8 Of 11:

Part 9 Of 11:

Part 10 Of 11:

Part 11 Of 11:

Terminal Voltage Table (Reference)