Steering: Service Precautions

WHEELS AND TIRES REMOVAL/INSTALLATION
1. The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, tighten it to 89 - 127 Nm (9.0 - 13.0 kgf-m, 86 - 94 ft. lbs.).

SUSPENSION PARTS REMOVAL/INSTALLATION
1. Tighten any part of the suspension that uses rubber bushings only after the vehicle has been lowered and unloaded.

POWER STEERING COMPONENTS REMOVAL/INSTALLATION
1. If any power steering fluid lines has been disconnected anytime during the procedure, add ATF M-III or equivalent (e.g. Dexron(R)II), bleed the fluid lines, and inspect for leakage after the procedure has been completed.