Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2000 >> Millennium Edition V6-2.3L DOHC (Miller cycle) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> EGR Valve Position Sensor >> Testing and Inspection >> Component Inspection

Component Inspection




1. Disconnect the EGR valve position sensor connector.
2. Disconnect the vacuum hose from the EGR valve and connect the vacuum pump to the EGR valve.

Specification:




3. Use an ohmmeter to measure the resistance between the terminals as shown in the table.
- If not as specified, replace the EGR valve.
pro multis · About Operation CHARM