Trunk Lid Lock and Opener

1. To remove the trunk lid opener cable, perform the following.
1. Remove the driver's seat.
2. Remove the driver-side front and rear scuff plate.
3. Remove the driver-side B-pillar lower trim.
4. Remove the driver's seat belt lower anchor.
5. Remove the passenger's side tire house trim.
6. Remove the trunk end trim.
7. Turn the floor covering over.




2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. Adjust the trunk lid opener cable.

1. Disconnect the negative battery cable.




2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.