Daytime Running Lamp Control Unit: Testing and Inspection

DRL CONTROL MODULE INSPECTION (CANADA)
1. Remove the bracket and pull it toward you.

Terminal Voltage List (Reference) - Connector View:

Terminal Voltage List (Reference) - Pinouts (1A - 2C):

Terminal Voltage List (Reference) - Pinouts (2D - 2H):

2. Measure the voltage at the DRL control module terminals as indicated.
3. Disconnect the DRL control module connector before inspecting for continuity at terminals 1D.
- If not as specified, inspect the parts listed under "Action" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, replace the DRL control module.