Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2001 >> MX-5 Miata L4-1.8L DOHC >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - A/T >> Transmission Speed Sensor >> Testing and Inspection >> Output

Output

OUTPUT SPEED SENSOR INSPECTION
1. Disconnect the output speed sensor connector.
2. Remove the output speed sensor.

Note:
^ Resistance value output speed sensor varies with temperature. Normal resistance value occurs when the temperature is 20°C (68°F), but it may be abnormal at high temperatures. Therefore, do not determine the resistance value on at 20°C (68°F).





3. Measure the resistance between the terminals of the output speed sensor.
^ If not correct, replace the output speed sensor.
Resistance 387 - 473 Ohms (20°C (68°F))
4. Install the output speed sensor.
Tightening torque 5.0 - 6.8 Nm (5 - 70 kgf-cm, 44 - 60 inch lbs.)
5. Connect the output speed sensor connector.
6. Connect the negative battery cable.
pro multis · About Operation CHARM