Extension Housing Component Assembly

ASSEMBLY
- Assemble in the order indicated in the table.

Oil Seal Assembly Note





- Install the new oil seal in the extension housing using the SSTs and a hammer.

Bushing Assembly Note





- Install the new bushing in the extension housing using the SST and a hammer.

Plug Assembly Note





- Install the new plug in the extension housing using a suitable round bar and a hammer.

Baffle Plate Assembly Note
1. Grip the pawl of the baffle plate and shrink the outside diameter using a plier.





2. Face the baffle plate in the direction shown in the figure and insert until it contacts the depth of the baffle plate installation hole.

Torsion Spring Assembly Note





- Install the torsion spring to the control lever as shown in the figure.