Active Command Modes Procedure

Active Command Modes Procedure

Note: When driving the ABS motor and each valve forcibly, turn VPWR RLY on, and then each command on. VPWR RLY regulates the power supply for the ABS motor and eight valves.

1. Perform the NGS tester hook-up procedure.
2. Perform Steps 1 through 9 form the DTCs reading procedure.





3. Turn the ignition key to ON (engine off) or start the engine. Move the cursor to ACTIVE COMMAND MODES. Press the TRIGGER key to enter this selection.





4. Move the cursor to ABS OUTPUT CONTROL. Press the TRIGGER key to enter this selection.
5. Move the cursor to command. Press the TRIGGER key to enter this selection.