Engine Installation

Engine and transaxle installation note





1. Loosen No. 4 engine mount bracket nuts C.





2. Hand tighten No. 4 engine mount bracket nuts C.
3. Slowly lower the engine and transaxle as a unit. Keep the engine from swinging or bumping into components it the engine compartment.

No. 3 engine mount sub bracket installation note





1. Install the No. 3 engine mount sub bracket.
2. Hand tighten No. 3 engine mount sub bracket nuts D.

No. 4 engine mount bracket installation note





1. Install the No. 4 engine mount bracket.
Tightening torque 44 - 50 Nm (4.4 - 6.2 kgf-m, 32 - 44 ft. lbs.)
2. Hand tighten No. 4 engine mount bracket bolts F.

Engine mount member installation note





1. Remove the engine and transaxle from the chain block and securely support it with the SST (engine support).





2. Install engine mount member bolts B.
Tightening torque B: 67 - 93 Nm (6.8 - 9.5 kgf-m, 50 - 68 ft. lbs.)
3. Hand tighten No. 2 engine mount nuts A.

No. 1 engine mount bracket installation note





1. Install the No. 1 engine mount bracket.
Tightening torque 75 - 104 Nm (7.6 - 10.7 kgf-m, 55.0 - 77.3 ft. lbs.)
2. Remove the SST (engine support).

No. 1 engine mount stay installation note





1. Install the No. 1 engine mount stay.
Tightening torque
G: 6.87 - 9.80 Nm (70 - 100 kgf-cm, 60.8 - 86.7 inch lbs.)
H: 75 - 104 Nm (7.6 - 10.7 kgf-m, 55.0 - 77.3 ft. lbs.)





2. Tighten No. 2 engine mount nuts A.
Tightening torque 75 - 104 Nm (7.6 - 10.7 kgf-m, 55.0 - 77.3 ft. lbs.)





3. Tighten No. 3 engine mount sub bracket nuts D.
Tightening torque D: 75 - 104 Nm (7.6 - 10.7 kgf-m, 55.0 - 77.3 ft. lbs.)





4. Tighten No. 4 engine mount nuts C and bolts F.
Tightening torque C, F: 67 - 93 Nm (6.8 - 9.5 kgf-m, 50 - 68 ft. lbs.)