Stall Speed Test
Stall Test1. Perform mechanical system test preparation.
2. Shift the selector lever to D range.
Caution: If the accelerator pedal is pressed for longer than 5 seconds while the brake pedal is pressed, the transaxle could be damaged. Therefore, do steps 3 and 4 within 5 seconds of each other.
3. Firmly depress the brake pedal with the left foot, and gently depress the accelerator pedal to floor with the right.
4. When the engine speed no longer increases, quickly read the engine speed and release the accelerator pedal.
5. Shift the selector to the N position and let the engine idle for 1 minute or more to cool the ATF.
6. Perform stall tests for the remaining ranges in the same manner.
1 S range (non-HOLD), S range (HOLD)
2 L range (non-HOLD), L range (HOLD)
3 R position
Engine stall speed
D, S, L range 2,000 - 2,500 rpm
R position 2,000 - 2,500 rpm
Evaluation of stall test