Front Beltline Molding

1. Open the door glass fully.
2. Disconnect the negative battery cable.
3. Remove the power outside mirror. (See Door Screen Removal Note.)
4. Remove the front door glass. (See Door Screen Removal Note.)




5. Remove as indicated below.
1. Front beltline molding (See Front Beltline Molding Removal Note)

6. Install in the reverse order of removal.

Front Beltline Molding Removal Note

1. Remove the installation screws.




2. Insert a tape-wrapped screwdriver under the clip as shown. Lift the screwdriver and pull up the molding to remove it.