Component Tests and General Diagnostics

KEYLESS CONTROL MODULE INSPECTION

1. Remove the rear seat back.
2. Measure the voltage at the keyless control module terminals using a voltmeter.
3. Disconnect the keyless control module connector and inspect for continuity to ground at terminal L.
- If not as specified, inspect the parts listed under "Action" and the related wiring harnesses.
- If the parts and wiring harnesses are okay but the system still does not work properly, perform the symptom troubleshooting. (See FOREWORD.)

Terminal Voltage Table (Reference) - Connector View:

Terminal A - C:

Terminal D - P:

Terminal Voltage Table (Reference)