Reading and Clearing Diagnostic Trouble Codes

INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE




NOTE: In this mode, it is possible to check the items in the chart.

- Diagnostic trouble codes which are not listed may be indicated, but they cannot be inspected.
- The diagnostic trouble codes are displayed in numerical order.
- If the speed signal is put into the instrument cluster (the front wheels are rotated) while a code other than DTC 10 is displayed, the input/output check mode will be cancelled.
- The diagnostic trouble codes can be fast-forward by pushing and holding the tripmeter switch for 1 second or more.




Operating Order




Checking Order

NOTE: When inspecting more than two DTCs, perform the inspection by following the priority order of inspection indicated in the chart.