Fog/Driving Lamp: Service and Repair

FRONT FOG LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Turn over the mud guard.




3. Remove in the order indicated in the table.
1. Bolt
2. Connector
3. Front fog light
4. Screw
5. Cover
6. Front fog light bulb (See Front Fog Light Bulb Removal Note)

4. Install in the reverse order of removal.
5. Adjust the front fog light.

Front Fog Light Bulb Removal Note
Remove the clip, then the front foglight bulb.

CAUTION: A halogen bulb generates extremely high heat when it is used. If the surface of the bulb is soiled, excessive heat will build up and the lights life will be shortened. When replacing the bulb, hold the metal flange, not the glass.