Transmission Temperature Sensor/Switch: Service and Repair

TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR REMOVAL/INSTALLATION [GF4A-EL]
1. Remove the control valve body cover.
2. Disconnect the TFT sensor connector.
3. Remove the TFT sensor.





4. Install a TFT sensor.
Tightening torque 6.5 - 7.8 Nm (66 - 80 kgf-cm, 58 - 69 inch lbs.)
5. Connect the TFT sensor connector.
6. Install the control valve body cover.