Alternator
Generator Specifications| Voltage at Terminal L | ||
| Ignition Switch ON | Approximately 1.0 V | |
| Idle | 13.0-14.0 V | |
| Standard Voltage | ||
| Terminal | Ignition Switch: ON | Idle |
| B | B+ B+: Battery Positive Voltage | B+ B+: Battery Positive Voltage |
| L | Approximately 1.0 V | Approximately 1.0 V less than B+ B+: Battery Positive Voltage |
| S | B+ B+: Battery Positive Voltage | B+ B+: Battery Positive Voltage |
| IG | B+ B+: Battery Positive Voltage | B+ B+: Battery Positive Voltage |
| Standard Current (Referance) The values are measured with the battery fully charged. As the battery discharges, the current becomes greater. | ||
| Electrical Load | Idle | 2,000 RPM |
| OFF | Approximately 11 A | Approximately 12 A |
| ON When the measuring condition is "electrical load ON", turn all the following electrical systems on. Headlights (high Beam). A/C Max. Brake Light Cooling Fan Condenser Fan | Approximately 67 A | Approximately 78 A |
| Rotor | ||
| Rotor Resistance Between Slip Rings | 2.7-3.1 Ohms At 20 degrees C (68 degrees F) | |
| Brushs | ||
| Brush Length | ||
| Standard | 0.41 in | |
| Minimum | 0.06 in |