Charging System: Specifications
Charging System SpecificationsBattery | ||
Open Circuit Voltage | Above 12.4 V | |
Test Load Chart | ||
Battery | Load (A) | |
55D23L | 180 | |
75D23L | 195 | |
80D26L | 195 | |
Battery Voltage With Load | ||
Approximate Battery Temperature | Minimum Voltage (V) | |
21 degrees C (70 degrees F) | 9.6 | |
15 degrees C (60 degrees F) | 9.5 | |
10 degrees C (50 degrees F) | 9.4 | |
4 degrees C (40 degrees F) | 9.3 | |
Charging Current | ||
Battery Type (5 Hour Rate) | Slow Charge (A) | Quick Charge (A) |
55D23L (48) | 4.5-5.5 | 30 |
75D23L (52) | 5.0-6.0 | 35 |
80D26L (55) | 5.5-6.5 | 35 |
Generator | ||
Voltage at Terminal L | ||
Ignition Switch ON | Approximately 1.0 V | |
Idle | 13.0-14.0 V | |
Standard Voltage | ||
Terminal | Ignition Switch: ON | Idle |
B | B+ B+: Battery Positive Voltage | B+ B+: Battery Positive Voltage |
L | Approximately 1.0 V | Approximately 1.0 V less than B+ B+: Battery Positive Voltage |
S | B+ B+: Battery Positive Voltage | B+ B+: Battery Positive Voltage |
IG | B+ B+: Battery Positive Voltage | B+ B+: Battery Positive Voltage |
Standard Current (Referance) The values are measured with the battery fully charged. As the battery discharges, the current becomes greater. | ||
Electrical Load | Idle | 2,000 RPM |
OFF | Approximately 11 A | Approximately 12 A |
ON When the measuring condition is "electrical load ON", turn all the following electrical systems on. Headlights (high Beam). A/C Max. Brake Light Cooling Fan Condenser Fan | Approximately 67 A | Approximately 78 A |
Rotor | ||
Rotor Resistance Between Slip Rings | 2.7-3.1 Ohms At 20 degrees C (68 degrees F) | |
Brushs | ||
Brush Length | ||
Standard | 0.41 in | |
Minimum | 0.06 in |