Steering: Service Precautions

Wheels and Tires Removal/Installation
1. When a wheel is removed, tighten it to 89 - 127 Nm (9.0 - 13.0 kgf-m, 66 - 94 ft. lbs.).

Suspension Parts Removal/Installation
1. Tighten any part of the suspension that uses rubber bushings only after the vehicle has been lowered and unloaded.

Power Steering Components Removal/Installation
1. If any power steering fluid lines have been disconnected anytime during the procedure, add ATF M-III or equivalent (e.g. Dexron(R)III/Mercon(R)), bleed the fluid lines, and inspect for leakage after the procedure has been completed.