Torque Converter
TORQUE CONVERTERNOTE: The torque converter is welded together and cannot be disassembled.
Inspection
1. Check the outer part of the converter for damage or cracks, and replace if necessary.
2. Check for rust on the pilot hub of the converter or on the boss. If there is any, remove it completely.
Wash Inside Of Converter
1. Drain any ATF remaining in the converter.
2. Pour in ATF (approximately 2.0 L (2.1 US qt, 1.7 Imp qt)).
3. Shake the converter to clean the inside. Pour out the ATF
4. Pour in ATF again.
5. Shake the converter to clean the inside. Pour out the ATF.