Disassembly and Assembly

1. Lower or raise the front door glass so that the distance from the top of the front door glass at the rear end to the upper part of the front beltline molding is 130 mm (5.12 in).
2. Disconnect the negative battery cable.
3. Remove the front door trim.




4. Disassemble in the order indicated below.
1. Inner handle
2. Door screen
3. Front door glass
4. Front power window regulator
5. Front manual window regulator
6. Glass run channel
7. Crush pad A
8. Front door lock
9. Door lock knob
10. Outer handle
11. Door key cylinder
12. Door weatherstrip
13. Crush pad B

5. Assemble in the reverse order of disassembly.