Disassembly/Assembly
SUNROOF UNITDISASSEMBLY
1. Remove the screws, and then remove the drip rail.
2. Remove the sunshade stopper.
3. Slide the sunshade backward, and remove it from the sunroof frame.
4. Remove the screws, and then remove the rear drip.
5. Slide the drip shoe backward, and remove it from the sunroof frame.
6. Remove the sunroof motor.
7. Remove the stopper screw.
8. Slide the guide backward, and remove it from the sunroof frame.
9. Remove the deflector.
ASSEMBLY
1. Install the deflector.
2. Slide the guide forward, and install it to the sunroof frame.
3. Install the stopper screw.
4. Move the guide by hand until it is tilted up position.
5. Move the link built into the guide by hand until it is aligned with mark A and mark B.
6. Install the sunroof motor.
7. Slide the drip shoe forward, and install it to the sunroof frame.
8. Use PA (Isopropyl alcohol) to remove any excess repair sealant.
9. Install the screws, and then install the rear drip.
10. Slide the sunshade forward, and install it to the sunroof frame.
11. Install the sunshade stopper.
12. Install the screws, and then install the drip rail.