LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2001 >> Protege DX L4-1.6L DOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Automatic Transaxle FN4A-EL >> FN4A-EL Automatic Transaxle Service >> Automatic Transaxle Inspection >> Clutch Component Preinspection

Clutch Component Preinspection

Clutch Component Preinspection

Clutch operation
1. Set the clutch component onto the end cover.

Caution: Applying compressed air to the assembled clutch pack for longer than 3 s at a time will damage the seal. Do not apply compressed air for more than the aforementioned time when testing the system.





2. Inspect the clutch operation by applying compressed air as shown.

Air Pressure:
392 kPa (4.0 kgf-cm2, 57 psi) max.

3. If not as specified, replace parts as necessary.
scientia non olet · About LEMON Manuals