Idle Speed: Adjustments

ENGINE TUNE-UP [FS]
Engine Tune-up Preparation
1. Warm up the engine to normal operating temperature.
2. Shift the transaxle into neutral.
3. Turn off all electrical loads.
- Headlight switch
- Fan switch
- Rear window defroster switch
- A/C switch
4. Verify that the steering wheel is at straight ahead position.





5. Connect the SSTs (WDS or equivalent) to the - DLC-2.
6. Access RPM PID.
7. Wait until the electrical fan stops.

Idle Speed Adjustment
1. Perform "Engine Tune-up Preparation".





2. Verify that the RPM PID is within the specification
- If not as specified, adjust the idle speed by turning the AAS.
Specification 65 - 750 (700 ±50) rpm

Caution: The TAS is set at the factory and must not be adjusted. Any adjustment will negatively effect the engine performance

3. Connect the SST (System selector) to the DLC.
4. Set switch A to position 1.
5. Set the test switch to SELF TEST.
6. Press CLEAR to clear previously selected items.
7. Disconnect the SSTs.