Sunroof / Moonroof: Adjustments

1. Fully close the glass panel.




2. Measure the gap and height between the glass panel and body.
- If not as specified, loosen the glass panel installation screws and reposition the glass panel.

Clearance
a: 0.2 - 2.2 mm {0.008-0.086 in}
b: 0 mm {0 in}

3. Tighten the installation screws.




4. Insert a prepaid card between the weatherstrip and the body of the vehicle. Verify that the sunroof is shut tightly (there is resistance when the prepaid card is moved).
- If the sunroof is not shut tightly, readjust by performing Steps 3 and 4.