Antenna, Radio: Service and Repair

POWER ANTENNA REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the trunk side trim (LH).




3. Remove in the order indicated below.
1. Rear antenna feeder
2. Connector
3. Drain hose
4. Mounting nut
(See Mounting Nut Removal Note)
5. Spacer
6. Nut
7. Power antenna

4. Install in the reverse order of removal.

Mounting Nut Removal Note




1. Use snap-ring pliers to remove the mounting nut.

POWER ANTENNA DISASSEMBLY/ASSEMBLY




1. Disassemble in the order indicated below.
1. Drain hose
2. Screw
3. Bracket
4. Rod insulator
5. O-ring
6. Motor

2. Assemble in the reverse order of disassembly.