Coolant Leakage Inspection

ENGINE COOLANT LEAKAGE INSPECTION






1. Inspect the coolant level.
2. Remove the radiator cap.
3. Connect a radiator can tester and the SST to the radiator filler neck.

Caution:
^ Applying more than 123 kPa (1.25 kg.cm, 17.8 psi) can damage the hoses, fittings, and other components, and cause leakage.

4. Apply pressure to the radiator.
Pressure 123 kPa (1.25 kg.cm2, 17.8 psi)
5. Verify that the pressure is held.
^ If not, inspect the system for coolant leakage.