Cylinder Block Disassembly (I)
CYLINDER BLOCK DISASSEMBLYExternal Components
1. Disassemble in the order indicated in the table.
Flywheel (MT), Drive Plate (AT) Disassembly Note
1. Hold the crankshaft using the SST.
Oil Pan Disassembly Note
1. Remove the oil pan mounting bolts.
2. Insert a screwdriver only at the points shown.
Caution: Pry tools can easily scratch the cylinder block and oil pan contact surfaces.
Oil Pump Disassembly Note
1. Remove the oil seal using a screwdriver protected with a rag.
Rear Cover Disassembly Note
1. Remove the oil seal using a screwdriver protected with a rag.