Electrical Connectors
ELECTRICAL SYSTEMConnectors
Disconnecting connectors
^ When disconnecting two connectors, grasp the connectors, not the wires.
^ Connectors can be disconnected by pressing or pulling the lock lever as shown.
Locking connector
^ When locking connectors, listen for a click indicating they are securely locked.
Inspection
^ When a tester is used for checking continuity or measuring voltage, insert the tester probe from the wiring harness side.
^ Check the terminals of waterproof connectors from the connector side since they cannot be accessed from the wiring harness side.
Caution: To prevent damage to the terminal, wrap a thin wire around the lead before Inserting Into terminal.