M15M-D

TRANSMISSION OIL REPLACEMENT [M15M-D]





1. Remove the drain plug B with washer and the check plug A.
2. Drain the oil into a container
3. Wipe all plugs clean
4. Install the drain plug B with new washer.
Tightening torque B: 40 - 58 Nm (4.0 - 5.0 kgf-m, 29 - 43 ft. lbs.)





5. Add the specified oil from check plug A port until the level reaches the brim of check plug hole
Specified oil
Grade: API service GL-4 or GL-5
Viscosity: SAE 75W-90 (All season) or SAE 80W-90 (Above 10°C (50°F))
Capacity (approximate quantity): 2.0 L (2.1 US qt. 1.8 Imp qt)





6. Apply sealant to the threads of check plug A
7. Install the check plug A.
Tightening torque A: 25 - 39 Nm (2.5 - 3.0 kgf-m, 19 - 28 ft. lbs.)