Fuel Pump Removal/Installation
FUEL PUMP (FP) REMOVAL/INSTALLATIONWARNING: Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, do not damage the sealing surface of the FP unit when removing or installing.
CAUTION: Disconnecting/connecting the quick release connector without cleaning it may cause damage to the fuel pipe and quick release connector. Always clean the quick release connector joint area before disconnecting/connecting using a cloth or soft brush, and make sure that it is free of foreign material.
1. Complete the BEFORE REPAIR PROCEDURE".
2. Disconnect the negative battery cable.
3. Uncover the rear package trim.
4. Remove the service hole cover.
5. Remove in the order indicated below.
1. Connector
2. Plastic fuel hose
(See Plastic Fuel Hose Disassembly Note)
(See Plastic Fuel Hose Assembly Note)
3. FP
6. Install in the reverse order of removal.
7. Complete the "AFTER REPAIR PROCEDURE".