Disassembly and Assembly

STEERING SHAFT DISASSEMBLY/ASSEMBLY





1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.





Steering Lock Mounting Bolts and Bracket Disassembly Note
1. Use a chisel to make a groove in the heads of the steering lock mounting bolts. Remove the bolts with a screwdriver. Remove the steering lock component.





Steering Lock Mounting Bolts and Bracket Assembly Note
1. Install the steering lock component. Install the new steering lock mounting bolts. Tighten the bolts until the heads break off.

STEERING SHAFT INSPECTION
1. Inspect the following, and replace the column component as necessary.





1 Column bearing damage.





2 Steering shaft length.

Length 593.8 - 595.8 mm (23.38 - 23.45 inch)