Drive Axles, Bearings and Joints: Service Precautions

PRECAUTION (DRIVELINE/AXLE)
Wheels and Tires Removal/Installation
1. When a wheel is removed, retighten it to 89 - 117 Nm (9.0 - 12.0 kgf-m, 65.1 - 86.7 ft. lbs.).

Suspension Arm Removal/Installation
1. Tighten any part of the suspension that uses rubber bushings only after vehicle has been lowered and unloaded.

Note: Unloaded... Fuel tank is full. Engine coolant and engine oil are at specified level. Spare tire, jack, and tools are in designated position.